ABSTRACT BACKGROUND: This study aimed to investigate the relationship between total and segmental bone mineral density (BDM) and physical activity (PA) in different domains (school, leisure and sports) among adolescents and children. DESIGN AND SETTING: Cross-sectional study in the Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP). METHODS: The study sample consisted of 173 children and adolescents (10.31 ± 1.87 years). The BMDs for the whole body (WB) and the regions of the trunk and legs were measured using dual energy X-ray absorptiometry (DXA). PA was measured using the Baecke questionnaire. A regression model was used to analyze the relationship between all the BMDs and the different domains of PA. RESULTS: 41.5% of the adolescents had high percentages of body fat. Regarding the comparison between physically active and insufficiently active adolescents, there were no statistically significant differences in any BMD variables (P > 0.05). The BMD of the legs showed positive relationships with the total PA (β = 0.009; P = 0.013) and sports PA (β = 0.010; P = 0.049) after insertion of the confounders. Similarly, the WB BMD showed the same relationships (total PA: β = 0.005; P = 0.045; and sports PA: β = 0.008; P = 0.049). No relationship was found between leisure and school PA and any of the BMDs (P > 0.05). CONCLUSION: The results indicated that practice of sport was related to higher BMD values, independent of sex, age and body fatness.

Resumo: Objetivo: Avaliar a sensibilidade e a especificidade de diferentes pontos de corte do índice de massa corporal para o prognóstico de sobrepeso/obesidade de acordo com os valores de gordura corporal estimados por absorciometria de raios X de dupla energia (DEXA) entre adolescentes brasileiros. Métodos: Estudo transversal que inclui 229 adolescentes do sexo masculino entre 10-15 anos, no qual foram avaliadas a adiposidade corporal e as medidas antropométricas. A situação nutricional foi classificada pelo IMC de acordo com os pontos de corte descritos na literatura científica. Resultados: Foram observadas concordâncias moderadas entre a gordura corporal estimada por DEXA e os cortes propostos por Cole et al. [K = 0,61], Conde e Monteiro [K = 0,65], Must et al. [K = 0,61] e a Organização Mundial de Saúde (OMS) [K = 0,63]. O IMC de forma contínua mostrou uma boa concordância com a DEXA [CCI = 0,72]. A maior sensibilidade foi observada em cortes por Conde e Monteiro [0,74 (0,62, 0,84)] e a maior especificidade por Cole et al. [0,98 (0,94, 0,99)]. Nas áreas abaixo da curva de ROC de pontos de corte analisados, foi observada uma diferença significativa ao se compararem os pontos de corte de Cole et al. e Conde e Monteiro [0,0449 (0,00294, 0,0927)]. Conclusões: O corte proposto por Conde e Monteiro foi mais sensível na identificação de sobrepeso e obesidade em comparação com o método de referência e o corte proposto por Cole et al. apresentou a maior especificidade para esses resultados.

Abstract: Objective: To evaluate the sensitivity and specificity of different cutoff points of body mass index for predicting overweight/obesity according to body fat values estimated by DEXA among Brazilian adolescents. Methods: Cross-sectional study including 229 male adolescents aged 10-15 years, in which body adiposity and anthropometric measures were assessed. Nutritional status was classified by BMI according to cutoff points described in scientific literature. Results: Moderate agreements were observed between body fat estimated by DEXA and cutoffs proposed by Cole et al. (K = 0.61), Conde and Monteiro (K = 0.65), Must et al. (K = 0.61) and WHO (K = 0.63). The BMI in continuous form showed good agreement with the Dexa (ICC = 0.72). The highest sensitivity was observed for cutoff by Conde and Monteiro (0.74 [0.62, 0.84]) and the highest specificity by Cole et al. (0.98 [0.94, 0.99]). For the areas under the ROC curve of cutoff points analyzed, significant difference comparing the cutoff points by Cole et al. and Conde and Monteiro (0.0449 [0.00294, 0.0927]) was observed. Conclusions: The cutoff proposed by Conde and Monteiro was more sensitive in identifying overweight and obesity when compared to the reference method, and the cutoff proposed by Cole et al. presented the highest specificity for such outcomes.

Resumo Objetivo: Analisar a relação entre a prática de artes marciais (judô, karatê e kung-fu) e a densidade mineral óssea em adolescentes. Métodos: O estudo foi composto por 138 adolescentes (48 praticantes de artes marciais e 90 não praticantes) de ambos os sexos, com média de 12,6 anos. A densidade mineral óssea foi medida com absortometria radiológica de dupla energia em braços, pernas, coluna, tronco, pelve e total. A carga de treinamento semanal e o tempo anterior de envolvimento na modalidade esportiva foram relatados pelo treinador. A correlação parcial testou a associação entre a carga semanal de treinamento e a densidade mineral óssea, controlada para sexo, idade cronológica, prática anterior e maturação somática. A análise de covariância foi usada para comparar os valores de densidade mineral óssea de acordo com os grupos controle e de artes marciais, controlados para sexo, idade cronológica, prática anterior e maturação somática. Associações significativas entre a densidade mineral óssea e a massa muscular foram inseridas em um modelo multivariado e as inclinações dos modelos foram comparadas com o teste t de Student (controle versus arte marcial). Resultados: Os adolescentes envolvidos na prática de judô apresentaram valores maiores de densidade mineral óssea do que os do grupo controle (p=0,042; tamanho de efeito médio [eta-quadrado=0,063]), enquanto a relação entre a quantidade de treinos semanais e a densidade mineral óssea foi significativa entre os adolescentes praticantes de judô (braços [r=0,308] e pernas [r=0,223]) e kung-fu (braços [r=0,248] e coluna [r=0,228]). Conclusões: Diferentes modalidades de artes marciais estão relacionadas com maior densidade mineral óssea em diferentes regiões do corpo em adolescentes.

Abstract Objective: The purpose of this study was to analyze the relationship between martial arts practice (judo, karate and kung-fu) and bone mineral density in adolescents. Methods: The study was composed of 138 (48 martial arts practitioners and 90 non-practitioners) adolescents of both sexes, with an average age of 12.6 years. Bone mineral density was measured using Dual-Energy X-ray Absorptiometry in arms, legs, spine, trunk, pelvis and total. Weekly training load and previous time of engagement in the sport modality were reported by the coach. Partial correlation tested the association between weekly training load and bone mineral density, controlled by sex, chronological age, previous practice and somatic maturation. Analysis of covariance was used to compare bone mineral density values according to control and martial arts groups, controlled by sex, chronological age, previous practice and somatic maturation. Significant relationships between bone mineral density and muscle mass were inserted into a multivariate model and the slopes of the models were compared using the Student t test (control versus martial art). Results: Adolescents engaged in judo practice presented higher values of bone mineral density than the control individuals (p-value=0.042; Medium Effect size [Eta-squared=0.063]), while the relationship between quantity of weekly training and bone mineral density was significant among adolescents engaged in judo (arms [r=0.308] and legs [r=0.223]) and kung-fu (arms [r=0.248] and spine [r=0.228]). Conclusions: Different modalities of martial arts are related to higher bone mineral density in different body regions among adolescents.

CAF process combines creep and precipitation hardening which are highly dependent on time and temperature. The aging cycle relax the stresses induced during the loading phase. At the end of the process stress relaxation induces shape changes in the part but significant spring back is observed (about 70%). Usually CAF cycles for 7XXX alloys use times around 20 h and temperatures in the range of 120°C to 190°C. In the present work CAF tests were performed using the alloy 7050 in an intermediate condition named Temper to Age Forming (TAF). Using the alloy 7050-TAF resulted in significant process time reduction. From TAF temper, only 8 hours are necessary to achieve properties comparable to T74. Coupons were submitted to CAF in two levels of initial stress, 190 MPa and 290 MPa, resulting in spring back values of 70% and 60 % respectively. In addition, constant load creep tests were performed in the same stress levels and time of CAF tests to find the creep strain values. Creep tests performed under 190 MPa resulted in strain values around 0,1% after 8 h. On the other hand creep tests performed under 290 MPa failed after 7 h with creep strain values of 1,7%. Results obtained are close to that found in previous studies and it is possible to conclude that the use of alloy 7050 in TAF condition allows CAF to be done in 8 hours, since the initial stress is lower than 290 MPa.

Creep-age forming (CAF) is an interesting process for the airframe industry, as it is able to form or shape panels into smooth, but complex, curvatures. In the CAF process, the ageing cycle of the alloy is used to relax external loads imposed to the part, through creep mechanisms. Those relaxed stresses impose a new curvature to the part. At the end of the process, significant spring back (sometimes about 70%) is observed and the success in achieving the desired form depends on how the spring back can be predicted in order to compensate it by tooling changes. Most of the applications relate to simple (non stiffened) panels. The present work deals with the CAF of aluminum panels for aircraft wing skin application. CAF was performed using vacuum-bagging autoclave technique in small scale complex shape stiffened panels, machined from an AA7475 alloy plate. An analytical reference model from the literature was employed estimate the spring back effect in such panel geometry. This model that deals with simple plates was adapted to stiffened panels using a geometric simplification, resulting in a semi-empirical model. The results demonstrate that CAF is a promising process to form stiffened panels, and the spring back can be roughly estimated through a simple model and few experiments.